?billet

billet發音

英：['b?l?t]　　美：[?b?l?t]

英：　　美：

billet中文意思翻譯

n.兵舍, 軍營,職位, 短木柴,鋼坯

v.宿營,分配住宿地

billet詞形變化

動詞過去式: billeted | 動詞第三人稱單數: billets | 動詞現在分詞: billeting | 動詞過去分詞: billeted |

billet常見例句

1 、For high-efficiency casting and variety development, silica insulation plate was replaced by basic dry lining material in the working layer of billet caster tundish.───為適應高效連鑄和開發新品種的需要,邯鋼第三煉鋼廠方坯連鑄中間包工作層用堿性干式自流料取代了硅質絕熱板。

2 、The reformation of double duo mill and realization casting billet hot delivery and hot charging in Xinyu Iron and Steel Corp. are introduced., and its further development is predicted.───介紹了新余鋼鐵有限責任公司線材廠對復二重軋機進行一火成材改造,實現連鑄坯熱送熱裝的過程,并對該廠今后的改造工程進行了預測。

3 、The paper introduces internal quality problem of CC billet after commissioning and reasons of rolled pipe infolding and solution.───介紹了包鋼連鑄坯在投產初期主要存在的內在質量問題及所軋鋼管產生內折等缺陷的對應原因和消除方法的探討。

4 、The process optimization for No.3 Billet Caster at Converter Plant which improves the production stability and strand quality has been introduced.───介紹轉爐煉鋼廠優化3號方坯連鑄機的生產工藝,使生產穩定性提高,鑄坯質量得到改善。

5 、On the other hand, the demand for finished goods as a result of the reduction of scrap and billet steel procurement activ ities has been suspended.───另一方面，由于產成品需求的降低，鋼廠對廢鋼和方坯的采購活動已經暫停。

6 、In continuous cast billet, the center macrosegregation is a kind of very harmful defect, especially for high-carbon steels.───在連續鑄鋼生產中,尤其對高碳鋼,中心偏析是一種常見的有害缺陷。

7 、Breakout of molten steel in billet continuous casting occurs frtquently.───在小方坯連鑄生產中，漏鋼事故經常發生。

8 、This paper reviews the development of tube mould for billet casting at hame andabroad, and puts emphasis on the development orientation.───回顧了國內外管式結晶器發展?fàn)顩r，并著重論述了管式結晶器的發展方向。

9 、Hardenability testing shall be carried out by Jominy testing at the billet stage in accordance with BS 4437.───可淬性測試應按照BS 4437在坯料階段由Jominy測試進行。

10 、It is considered that medium thick slab or sheet billet should be adopted for various users' demands in continuous casting and continuous rolling of hot strip in VAI.───VAI公司的熱帶鋼連鑄連軋基于不同考慮分別主張采用中厚板坯或者薄板坯，文中介紹了VAI的技術思想的特點和熱帶鋼連鑄連軋生產線配置方案。

11 、Rear Hub : Proprietary CNC billet aluminum.───后方樞紐:專有數控鋁坯.

12 、Effects of hot delivery and hot charge were analyzed.The effects were that hot delivery and hot charge could induce fuel and oil consumption of billet furnace, oddment of semifinished metal.───分析了熱送熱裝在降低企業加熱爐綜合燃耗、減少重油消耗、減少中間坯庫存等方面的作用;

13 、Letter steel products for a variety of leading brands of pig iron (BF ferromanganese), billet, bar strip.───信鋼主導產品為各種牌號的生鐵(高爐錳鐵)、鋼坯、棒帶材。

14 、The crucible for remelting needs to be improved. In oder to find a set of reasonable continuous remelting processing, the distributing of the temperature in the billet was simulated by the application of the ANSYS software.───為找到一套合理的連續重熔工藝,采用了ANSYS 數值模擬軟件進行了坯料在連續觸變重熔過程中的溫度場分布的模擬。

15 、The linear laser beam is projected on the surface of continuous cast billets vertically; the images of laser beam on the billet are captured by a CCD area-scan camera and then laser strips are extracted from the images.───將線型激光線垂直投射到連鑄方坯表面,利用面陣CCD攝像機采集激光線在方坯表面的圖像,從圖像中提取激光線條。

16 、This paper introduces the main equipments of this system,such as pinch roll,billet descaling,billet welding;burring;movable roller bed;billet insulation and welder hydraulic station,etc.───介紹了無頭軋制系統的夾送輥、鋼坯除鱗、鋼坯焊接、毛刺清理、活動輥道、鋼坯保溫、焊機液壓站等主要裝置。

17 、However, when his cool reflections returned, he plainly perceived that his case was neither mended or altered by Sophia's billet, unless to give him some little glimpse of hope from her constancy, of some favourable accident hereafter.───不過，當他的頭腦恢復冷靜的時候，他清楚地看到自己的處境并不因?yàn)樘K菲亞這封短簡而有所改善或改變，只是從蘇菲亞的堅貞不渝中得到一線希望，日后事情說不定會有個轉機。

18 、Through the combination with actual production and optimization of seconday cooling system,billet quality has been improved obviously.───與現場生產實際結合,優化二次冷卻制度,鑄坯質量得到明顯提高。

19 、The cause of formation of off - squareness of billet in high speed casting is analysedand the countermeasures for it are put forward in this paper.───分析了高拉速條件下方坯連鑄脫方缺陷產生的原因，提出了抑制脫方及進一步提高拉速的措施。

20 、He landed a lucrative billet with a publishing house.───他在一家出版社里謀到一個報酬很高的職位。

21 、He wasn't fond of the scene, which reminded him more of a recreational campground than the billet it was supposed to be.───他并不喜歡這個場景，因?yàn)檫@讓他想到更多的是娛樂性的野營而不是應有的兵舍。

22 、Practices in plant show that hydro-oxygen flame can be used discretely in billet cutting and it has remarkable econmical benefit.───實踐表明氫氧焰完全可以實現斷火切割,并且經濟效益顯著。

23 、However,the existing hot-centering machine failed to get the billet centered satisfactorily due to the fact that its positioning was not accurate.───但是原有的熱定心在使用過程中發現,其定心位置不準,與棒料中心偏差較大,無法達到定心的目的。

24 、Less orders were placed for products which were closely depended on the investment climate, such as billet, rolled steel, refined oil and plastic in primary form.───與投資密切相關的鋼坯、鋼材、成品油、初級形狀的塑料等原料性商品進口量均下降。

25 、The commercial 7A04 alloy as-extrusion was employed as raw material, and SIMA method (strain induced melting activety) was used to obtain semi-solid billet.───以擠壓態7A04合金SIMA法生成觸變組織為例,研究變形程度對其半固態觸變組織的影響。

26 、The working principle of automatic hydraulic billet shears in continuous-casting steel line was introduced.───介紹了全自動液壓鋼坯在線剪的工作原理。

27 、The exploratory testing study of modifying and fining the solidification structure of concast steel billet is carried out in concast production by the technology of electro-pulse modification.───在連鑄生產中利用電脈沖孕育處理技術,開展改善和細化連鑄坯凝固組織的試驗研究。

28 、Walking Beam Furnace for Heating Thick Plate Billet───厚板坯步進梁式加熱爐

29 、The influence of multislit rolling on the conroll of bar steel bas been analysed from balancing of matter flow, the linking of tEe processes and matching of billet 's temperature.───同時，從物流銜接、工藝銜接、溫度銜接等方面分析了多線切分軋制對棒材連鑄連軋的影響；

30 、Because of using rectangular billet in traditional production process of welded pipe, the barb, faulty soldering and formations of agglomerated ball etc.───傳統焊管因采用矩形坯料使焊縫存在毛刺、虛焊、焊縫起鎦等,影響產品質量。

31 、The above figures for the number of finished steel output of Letters (not including coMModity billet), eventually the data in the company's periodic reports shall prevail.───以上數據為成品鋼材產量快報數(未包括商品鋼坯)，最終以公司定期報告中的數據為準。

32 、A mathematical model depicting the initial solidification of the billet is built up and verified with the experimental data.───建立了描述小方坯初始凝固的三維數學模型,并用實驗數據進行了驗證。

33 、The present paper introduces the main content of the revamp of No.3 continuous billet caster into a high efficient caster in Hefei Iron & Steel Corp.and its results.───介紹了合鋼3號小方坯連鑄機高效改造的主要內容及效果。3號小方坯連鑄機經改造后,溢漏率減少,鑄坯質量明顯提高,消耗大幅下降

34 、I'm going with that fat guy over there in billet six.─── 我就跟6號房那個胖子一起去了

35 、The prinsiple requirements for cavity shape and structure of CC mould are analysed,the development and process result of billet CC mould discussed.───分析了連鑄結晶器型腔形狀和結構設計的基本要求，討論了小方坯連鑄結晶器的發展以及取得的工藝效果。

36 、Application status of a new homemade coating for steel billet in high temperature dynamic process was introduced.───介紹了一種自主開發的動態過程鋼坯高溫防氧化涂料的應用狀況。

37 、The introduction and probe into the tecknology - remade of the continuous casting billet , direct rolling and wires in cogging lines for Changzhi Iron and Steel Company Third Roll Plant.───介紹和探討了長鋼三軋廠開坯車間半連續式軋機組線材技術改造和實現開坯車間一火成材。

38 、The reason of shrinkage in billet is analysed. The improvement measurement is put forward and the operation shows good results.───分析了小方坯縮孔產生的原因,提出了改進措施,通過實施取得明顯效果。

39 、This paper introduces the main equipments of this system, such as pinch roll, billet descaling, billet welding;burring;movable roller bed;billet insulation and welder hydraulic station, etc.───介紹了無頭軋制系統的夾送輥、鈉坯除鱗、鋼坯焊接、毛刺清理、活動輥道、鋼坯保溫、焊機液壓站等主要裝置。

40 、Billet Pusher qua the main equipment of the high speed wire rod mill stands,have occurred a lot of failure in several years ago.───作為高速線材軋機主體設備的推鋼機,多年來故障頻繁。

41 、This paper analyses the causes of breakout after modification of Demag continuous billet caster and puts forward the preventing measure. The remarkable effects have been obtained.───對德馬克型連鑄機改造后漏鋼事故頻繁發生的原因進行分析,提出改進措施,取得了較好的效果。

42 、Surface defect and macrostructure of high carbon steel billet were analyzed.───介紹了鑄坯相關表面缺陷及低倍組織,提出了質量控制措施及方案。

43 、To improve the surface quality of Al matrix composite billet,the experiment on soft-contact electromagnetic continuous casting was carried out through EMC slotted mould.───為改善鋁基復合材料鑄坯的表面質量,采用割縫式結晶器并在初始凝固區域分別施加等幅高頻磁場和調幅磁場進行軟接觸電磁連鑄實驗。

44 、But continuous casting square billet simulate temperature field and forecast in a single process research at CC-HCR, induction heating .It can not be adapted at complexity and variety production.───但是,目前有關連鑄方坯在熱送、熱裝、感應加熱過程中的溫度場模擬與預報大多是針對某單一過程的研究,不能適應實際生產中呈現的復雜性和多樣性。

45 、But it hasn't the report about this new technology of the continuous casting square billet made well applied in large-scale industrialized .───但連鑄方坯的熱送直軋新工藝在大規模工業化生產中的應用我國迄今仍未見有成功的報道。

46 、The high-efficiency reform of rectangular billet continuous caster of Xuanhua Iron and Steel Company is introduced, that can be used as reference for other continuous casters.───介紹了宣鋼煉鋼廠矩形坯連鑄機的高效化改造，可供矩形坯、板坯連鑄機高效化改造參考。

47 、In these offices and in the billets of your personal staff.─── 裝在這些辦公室里 和你手下的宿舍里

48 、Under this condition, the tailormade billet could be produced by make corresponding change on the descending velocity o...───依靠調整接收基板的下降速度可獲得預定外形尺寸的圓錠。

49 、This paper analyzes the reason that caused the surface defect of billet produced by EAF Steelmaking plant of Nanjing Iron and Steel Co.Ltd.───分析了南(京)鋼電爐廠小方坯表面質量問題及產生的原因,涉及結晶器振動參數、保護渣等。

50 、Research on the Reforming Technology of Small Billet Caster of Baotou Steel Corp.───包鋼小方坯連鑄機改造工藝研究。

51 、The intelligence control technique of thermal system was introduced and relation between the billet temperature and heating-burthen was discussed, and temperature of tapping was reduced.───并提出了引進熱工智能控制技術，研究鋼坯熱裝溫度與加熱負荷的關系，開展降低出鋼溫度試驗研究的優化熱工制度的思路。

52 、It proved in practice that the radiaters has an effect on improvement of billet heating quality and reduction of fuel consumption.───實踐證明：輻射傳熱體對改善鋼坯加熱質量、降低燃耗有較好的效果。

53 、A type of new slide rails with holes have been designed in order to solve"black-mark"of billet when it was heated.───孔洞式熱滑軌是為消除鋼坯在加熱時產生的黑印而設計的一種新型滑軌,并在實際應用中取得了良好的效果。

54 、Author introduced furnace Construction Lining building and dry at a fire of walking beam heating furnace heats plate billet both up and down heating.───介紹了加熱板坯用上下供熱步進梁式加熱爐爐型結構概況、爐襯施工及烘烤技術。

55 、The paper introduces the billet production and existing problems of Q195 steel. Through practice, corresponding measures had been taken to gain good results.───介紹了Q195鋼小方坯生產的情況和存在問題,并提出了相應的解決辦法,通過實踐取得了較好的效果。

56 、CAUSES OF CRACK FORMATION OF CONTINUOUS CASTING BILLET AND PRECAUTIONARY MEASURES AT ANYANG IRON AND STEEL CORP.───安鋼連鑄小方坯裂紋形成的原因和預防措施。

57 、Introducting a gear billet forming die carrier structure used on friction press for no fash forming discusses die carrier guide ,ejector pins and main elements selection of materials,heat treatment.───介紹了一種在摩壓機上采用無飛邊模鍛齒輪坯的模架結構。對模具的導向、頂料裝置以及主要構件的選材、熱處理進行了論述。

58 、This paper analyses the reasons on breakout of continuous casting billet in luegang.Good results have been achieved upon implementation of the appropriate measures.───對略鋼小方坯連鑄機鑄坯脫方的原因進行了分析,并采取了相應的對策后,取得了較好的效果。

59 、The steel export even saw a steep shrink at the same time, with billet steel falling by 97% YoY.───與此同時，鋼材出口量急劇萎縮，鋼坯的出口量與去年同期相比更是下降了97%。

60 、The influence of over-heat and draw speed on inner fold defects of seamless steel tube is analyzed in hot test process of 20 steel from point of view of inner solidified organization of CC billet.───從連鑄坯內部凝固組織的角度出發,分析了20鋼在熱試過程中,過熱度、拉速對無縫管內折缺陷的影響,并提出了改善內部組織的措施,以減少內折廢品的產生。

61 、Mix in Mn bedspring billet have 20Must or carbolic knot steel, mix in wire rod 20Must is waited a moment.───Mn彈簧鋼坯中混有20Must或碳結鋼，盤條中混有20Must等等。

62 、A systematic mathematical model group has been developed to simulate the billet section temperature distribution, austenite structure evolution and products properties.───開發了用于模擬高碳鋼高速線材生產過程中斷面溫度分布,奧氏體組織演變和產品性能的系統數學模型組。

63 、The improvement of immersion nozzle in square billet caster is introduced,the result extinguished.───介紹了邯鋼方坯連鑄機浸入式水口的改進,保護澆注效果顯著。

64 、MSZ160-8 type unburned Press, is used to suppress in order to fly ash, sand, slag, coal gangue, tailings as raw materials such as billet免燒磚can also suppress the cement brick and firebrick.───8型免燒壓磚機，是用于壓制以粉煤灰、河沙、爐渣、煤矸石、尾礦砂等為原料的免燒磚坯，還可以壓制水泥磚和耐火磚。

65 、The Synergy N9 rotor head features composite blade grips and a CNC billet aluminum head block.───協同n9旋翼頭特點復合刀片**柄和數控方坯鋁頭座.

66 、to billet his soldiers in the finest old castles───分派戰士們住在最好的古城堡里

67 、It purchased a used ladle furnace and billet caster from Societe Metallurgique de Normandie in France.───它從法國諾曼底的一家公司手里購買了一套精煉爐和鑄壓機。

68 、But later problems occurred, for instance, secondary melting iron for steelmaking, dispatching billet for steelrolling are backward in the domestic metallurgical industry.───但在以后的發展中存在一定問題,如:二次化鐵煉鋼、調坯軋材,在全國冶金行業中處于落后狀態。

69 、The article introduced the process of high -efliciency of billet CC. at 4# of Changgang and analysed the effects and exsiting problem, the way is sovled.───介紹了長鋼4號機高效化改造的過程,改造后的效果及存在的問題、解決的辦法。

70 、Billet: similar to a bloom, but up to 15crux 15cm in size.───小方坯--與大方坯相似，但最大尺寸不超過15cm×15cm。

71 、The key works and the process characteristics.technique parameters,billet quality and improvement ofcontinuous casting for bearing steel in developed countries are introduced.───介紹了國外采用連鑄工藝生產軸承鋼的主要公司和廠家的有關工藝特點和參數以及鑄坯質量和改進措施。

72 、Soldiers were billet ed in all the houses of the village.───士兵被分配到全村的老百姓家里住宿。

73 、Design and Research of the Billet Bidirectional Hot-centering Machine of the Seamless Tube Plant of Baotou Steel Corp.───包鋼無縫廠管坯雙向熱定心機設計與研究。

74 、mechanical billet separating skid───坯料機械分送臺

75 、Five strand billet caster at Xining Special Steel Group Co.was revamped with improved functions.───對西鋼新建生產線五機五流小方坯連鑄機改造進行了綜述。

76 、The aluminum billet homogenizing, extrusion cooling, profile ageing also effect the hardness and resistance characterristics of aluminium profiles.───從鋁棒的均質、擠壓后的淬火、鋁材的時效處理都影響到鋁型材的硬度和抗沖擊性能。

77 、This paper presents the properties of bar billet c aster,analyses the composition of PLC system and its network communication and m onitoning system.The operating results are fully approved.───介紹了小方坯連鑄機的性能特點，分析了PLC系統的構成以及其網絡通訊和監控系統，對其運行結果作了充分肯定。

78 、The reason for inner crack of Q235 square billet is analyzed. It is considered that chemical component, molten steel temperature of tundish and drawing speed are the main elements.───分析了宣鋼煉鋼廠Q235方坯產生內裂的原因,認為化學成分、中包鋼水溫度和拉速是導致Q235方坯產生內裂的主要因素。

79 、The result shows that it is more possible for the HCC billet to form the cavity than the rolled bloom in rotary piercing operation owing to the former's plasticity less than the latter's.───實驗結果表明，水平連鑄管坯的塑性比軋制管坯差，斜軋穿孔時水平連鑄管坯形成孔腔的可能性比軋制管坯大得多。

80 、The mathematical model of wire cool controlled rolling based on the analysis of thermal process of billet after being discharged is established.───在詳細分析鋼坯出爐后熱過程特點的基礎上,建立了線材控冷軋制熱過程數學模型。

81 、On basis of the early work [1],the computation,design and construction of the compacting dies for metal powder billet have been described.───在文獻[1]的基礎上，敘述并歸納了金屬粉末鋼模壓制成形坯及相應的壓制模具結構的設計與計算方法、內容和步驟；

82 、The old mansion serve as the soldier ' billet for a week.───士兵在那所古宅里住了一個星期。

求文檔: 閥門術語對照集(漢語、英語、日語、法語、德語、意大利語、瑞典語)

常用熱處理術語 

[color=000080]101個熱處理常用詞匯

1. indication 缺陷

2. test specimen 試樣

3. bar 棒材

4. stock 原料

5. billet 方鋼，鋼方坯

6. bloom 鋼坯,鋼錠

7. section 型材

8. steel ingot 鋼錠

9. blank 坯料，半成品

10. cast steel 鑄鋼

11. nodular cast iron 球墨鑄鐵

12. ductile cast iron 球墨鑄鐵

13. bronze 青銅

14. brass 黃銅

15. copper 合金

16. stainless steel不銹鋼

17. decarburization 脫碳

18. scale 氧化皮

19. anneal 退火

20. process anneal 進行退火

21. quenching 淬火

22. normalizing 正火

23. Charpy impact text 夏比沖擊試驗

24. fatigue 疲勞

25. tensile testing 拉伸試驗

26. solution 固溶處理

27. aging 時效處理

28. Vickers hardness維氏硬度

29. Rockwell hardness 洛氏硬度

30. Brinell hardness 布氏硬度

31. hardness tester硬度計

32. descale 除污，除氧化皮等

33. ferrite 鐵素體

34. austenite 奧氏體

35. martensite馬氏體

36. cementite 滲碳體

37. iron carbide 滲碳體

38. solid solution 固溶體

39. sorbite 索氏體

40. bainite 貝氏體

41. pearlite 珠光體

42. nodular fine pearlite/ troostite屈氏體

43. black oxide coating 發黑

44. grain 晶粒

45. chromium 鉻

46. cadmium 鎘

47. tungsten 鎢

48. molybdenum 鉬

49. manganese 錳

50. vanadium 釩

51. molybdenum 鉬

52. silicon 硅

53. sulfer/sulphur 硫

54. phosphor/ phosphorus **

55. nitrided 氮化的

56. case hardening 表面硬化，表面淬硬

57. air cooling 空冷

58. furnace cooling 爐冷

59. oil cooling 油冷

60. electrocladding /plating 電鍍

61. brittleness 脆性

62. strength 強度

63. rigidity 剛性,剛度

64. creep 蠕變

65. deflection 撓度

66. elongation 延伸率

67. yield strength 屈服強度

68. elastoplasticity 彈塑性

69. metallographic structure 金相組織

70. metallographic test 金相試驗

71. carbon content 含碳量

72. induction hardening 感應淬火

73. impedance matching 感應淬火

74. hardening andtempering 調質

75. crack 裂紋

76. shrinkage 縮孔，疏松

77. forging 鍛（件）

78. casting 鑄（件）

79. rolling 軋（件）

80. drawing 拉（件）

81. shot blasting 噴丸（處理）

82. grit blasting 噴鋼砂（處理）

83. sand blasting 噴砂（處理）

84. carburizing 滲碳

85. nitriding  滲氮

86. ageing/aging 時效

87. grain size 晶粒度

88. pore 氣孔

89. sonim 夾砂

90. cinder inclusion 夾渣

91. lattice晶格

92. abrasion/abrasive/rub/wear/wearing resistance (property) 耐磨性

93. spectrum analysis光譜分析

94. heat/thermal treatment 熱處理

95. inclusion  夾雜物

96. segregation 偏析

97. picking 酸洗，酸浸

98. residual stress 殘余應力

99. remaining stress 殘余應力

100. relaxation of residual stress 消除殘余應力

101.   stress relief 應力釋放 [/color]

關于外貿內衣

billet-doux

是法語的情書的意思

是法國的一個內衣品牌

至于你說的正品

如果你指的是是不是一個正規的品牌那么是的

如果你指的是你在網上看到的內衣店出售的外貿內衣是不是正品的

那么只能說無法確定

Billet Doux是法國大眾內衣品牌，創立于1997年，其宗旨是為顧客提供更多價廉物美的內衣。Billet Doux善于把握女人的心理與情緒變化，其品牌標語為“與眾不同的自己”。Billet Doux的內衣以舒適、優雅、經典、誘人和挑釁等多種風格來滿足女人對自由的渴望和對新事物的追求。

Billet Doux推出的內衣系列，顏色、款式等豐富多樣，搭配模特各種俏皮的造型演繹，讓我們看到了Billet Doux的內衣充滿了無限活力。