?stiffener

stiffener 發音

英：[?st?fn?]　　美：[?st?f?n?r]

英：　　美：

stiffener 中文意思翻譯

stiffener 短語詞組

1、angle stiffener ─── [機] 加強角鋼

2、coaming stiffener ─── 緣圍加強肋

3、longitudinal stiffener ─── 縱向加強件 ─── 縱向加勁桿

4、vertical stiffener ─── 垂直扶強材 ─── 垂直防撓材

5、girder stiffener ─── 大梁加勁桿

6、radial stiffener ─── 徑向加勁肋

7、pipeline stiffener ─── [化] 管道支肋

8、secondary stiffener ─── 二次加勁肋

9、horizontal stiffener ─── 水平扶強材；橫向防撓材

10、corner stiffener ─── 角部加勁件

11、rib stiffener ─── 加勁肋

12、plate stiffener ─── [化] 加勁板

13、conical stiffener ─── [化] 加強錐

14、transverse stiffener ─── 橫向加勁肋； ─── 橫向防撓材； ─── 橫勁材；[建] ─── 橫向加強構件

15、lidless stiffener ─── 無蓋加勁肋

stiffener 詞性/詞形變化，stiffener變形

名詞復數形式:stiffeners

stiffener 相似詞語短語

1、stifle synonym ─── 扼殺同義詞

2、testify to ─── 證明；說明；證明，證實

3、stiffening whipped cream ─── 生硬鮮奶油

4、justify meaning ─── 證明意義

5、stifled tssf ─── 點畫tssf

6、stiffer bar ─── 加強筋

7、justify triangle congruence ─── 對正三角形同余

8、stiffness tensor ─── 剛度張量

9、justified show ─── 正當?shù)谋硌?/p>

10、unjustified financial levies ─── [法]亂攤派

stiffener 常見例句（雙語使用場景）

1、The proposed rebar stiffener was found to be very effective in improving the static behavior of the composite connections. ─── 建議加強筋加勁肋被發現能非常有效地提高連接復合的靜力性能。

2、This shows the small blocks glued to the stiffener. ─── 這表明，小砌塊膠合板向加勁。

3、Next, apply a second coat to both the stiffener and the disc, let them dry for a few minutes, and then press together. ─── 接下來，適用于第二層都加勁和光碟，讓他們干為幾分鐘，然后按下在一起。

4、This shows the stiffener glued to the disc. ─── 這表明，加勁粘到光盤上。

5、S bend box body thickness of each panel, stiffener size and spacing of the stiffener location, structural strength will be greatly affected. ─── 彎盒體各個面板的厚度、加強筋的間距尺寸和加強筋位置，將對結構強度有很大的影響。

6、Leave the foam on the wheel and mark the area where the stiffener will go. ─── 離開泡沫對車輪和馬克的地方加勁將路要走。

7、The relatively small reduction in stress intensity magnification factor with increasing stiffness of the stiffener. ─── 隨著加強肋剛度的增加，應力強度放大因子則相應有所減小。

8、The cohesive element for the nonlinear finite element software ABAQUS is used to simulate the interface between the stiffener and the skin. ─── 利用非線性有限元軟件ABAQUS粘接單元模擬筋條與蒙皮的脫層界面。

9、We have done some loading testing on the panel with different initial deflections and different stiffener. ─── 對不同初始撓度以及不同加勁規格的薄板作了加載試驗。

英語使用場景

Cut a small section of scrap stiffener, slip it behind the spokes, and draw in the stiffener area.

Prepare a finite element model of the bend stiffener and the umbilical and apply the loads specified in the second step.

This shows the stiffener glued to the disc.

This shows the small blocks glued to the stiffener.

Next, apply a second coat to both the stiffener and the disc, let them dry for a few minutes, and then press together.

A solid wood stem and mahogany floors and stiffeners complete the basic construction which has been particularly cleanly executed by West Custom.

The proposed rebar stiffener was found to be very effective in improving the static behavior of the composite connections.

Effects of column axial force and rib stiffener on hysteretic behavior of connections were synthetically considered for the first time during cyclic-loading.

Bulwark plate to be thickened and stiffener to be added in way of mooring hole.

本站其他內容推薦