?riser

riser發音

英：['ra?z?(r)]　　美：[?ra?z?]

英：　　美：

riser中文意思翻譯

n.起床者, 起義者,豎板, 冒口

riser常見例句

1 、Communication and Networking Riser───n. 通訊與網絡擴展卡

2 、The paper introduces the technology measures to obtain high quality zinc base alloy patterns such as:choked running pouring and insulating riser,plaster mould to be separated as cope and drag,etc.───介紹了為獲得高質量鋅基合金模具而采取的工藝措施,例如使用閉合式澆注和保溫(?)口,將石膏型分為上下型等;

3 、Mainly Mainly of high-grade aluminum alloy Accessories: handlebar, riser and deputy to, seat tube, bottle rack, etc.───主要以 高檔鋁合金配件為主：車把，立管，副把，座管，水壺架等！

4 、In order to produce heavy sectioned ductile iron working table by non riser casting process,the mould with sand coated chill and graphite chill and clay cores are used.───為實現厚大斷面大型球鐵實體花盤無冒口鑄造，采取掛砂冷鐵與石墨冷鐵組成的型芯強制冷卻；

5 、Bunch of early risers, all except one.─── 大家起得都很早 就除了你

6 、Yes, I always have time for early risers.─── 可以 我對早起的人都有時間

7 、Once I applied those ideas, I was able to become an early riser consistently.───一旦我應用了這些理念，我就能夠變成一個堅持早起的人。

8 、The heat input of gasification using coalite as solid heat carrier comes from combustion heat of the solid heat carrier in riser.───固體熱載體煤氣化的熱量靠提升燃燒產生。

9 、Pick up the marine riser.───吊出隔水管。

10 、In order to producte qualified inlet manifold casting, top gating system with lip riser and shell core made of precoated sand is used.───為了獲得合格的進氣歧管鑄件，采用壓邊頂鑄澆注系統和覆膜砂殼芯制作工藝。

11 、semi -permanent insulating riser sleeves───半永久型保溫冒口

12 、So being the proactive goal-achiever I was, I set out to become a habitual early riser.───因此作為一個目標導向主義者，我決定成為一個早起的人。我立刻把我的鬧鐘設在了早上5點。

13 、The Fron Male Voice Choir is arrayed on riser in the 13th century cathedral at St.Asaph in northern Wale.───在北威爾十圣阿瑟夫當?shù)剡@個建于13世紀的大教堂中，“福倫男聲合唱團”列隊于臺階上。

14 、The process was described,and the design parameters of both the gating system and riser,as well as the chills were given in the paper.───對這種工藝方法進了介紹,并且給出了包括澆注系統、冒口、冷鐵等的工藝參數設定范圍。

15 、She's an early riser(= she gets up early in the morning).───她是個習慣于早起的人。

16 、You grip the riser too hard, your shot'll torque.─── 你把手柄握得太緊 就射不準

17 、Even if the studio has a floating floor, a drum riser may still be helpful.───即使錄音棚有浮動地板，鼓臺也依然會有幫助。

18 、Casting Process Without Riser for the Big-Scale Plate Castings───大規格卡盤盤體鑄件無冒口鑄造

19 、A drift flux model and an energy dissipation model were set up and were used to describe the gas holdup in the riser and the circulating liquid velocity,respectively.───分別用“漂流通量模型”和“能量耗散模型”描述了氣含率和循環液速的變化情況。

20 、Get the riser handling tools ready.───準備隔水管的送入工具。

21 、But for me, switching from being a night owl to an early riser (and yes, it is possible) has been a godsend.───但是就我而言，從一個“夜貓子”轉變?yōu)樵缙鹫哂兄卮蟮囊饬x。

22 、They found that the optical drive's riser also included a FireWire bus.───他們發現光碟機的豎板也包含有 FireWire 匯流排。

23 、The plenum (OFNP) version may be used for riser applications as well, as it exceeds GR-409-CORE and ICEA-596 riser mechanical and environmental specifications.───天花板隔層型光纜也可用于豎井應用，因為它超出了GR-409-CORE和ICEA-596的豎井機械和環境要求。

24 、One of the key components of this technology is the gas-solids separator located at the outlet of the riser regenerator.───后置燒焦管出口的氣固分離裝置是實現這種工藝的關鍵設備之一。

25 、Pick up the riser tensioner support ring to the diverter housing.───將隔水管張力器支撐環鎖到轉噴器殼體上。

26 、Stab the riser onto the pin connector.───將隔水管**入銷釘連接器。

27 、Move the BOP to the moonpool door and attach the marine riser.───將防噴器吊到滑動門上，接上隔水管。

28 、Finite element analysis is used to establish a deepsea drilling riser dynamic analysis model under complex marine conditions such as ocean current and wave.───利用有限元分析方法建立了海浪、海流等復雜海況作用下深水隔水管受力分析計算模型。

29 、I'm a mindless, happy midget on a riser doing a monkeyass backbeat.─── 我又蠢又小 只能躲在后面打鼓

30 、Seriously, studies have found that night owls show reduced integrity of white matter in the brain compared to early risers.─── 說真的 研究顯示 與早起者相比 夜貓子的腦白質 退化得更嚴重

31 、She is a late riser.───她是一個起床晚的人

32 、Based on the analysis,the new concept of two-stage riser fluid catalytic cracking(TSRFCC) was proposed,and the ad...───在此基礎上,提出了兩段提升管催化裂化新概念,并分析了其技術優勢。

33 、In a square-section desulfurizing CSB, in order to overcome the defects mentioned above and to improve the desulfurization efficiency, the wedge-type internals were symmetrically mounted at the middle of the height of the riser.───今在過去實驗的基礎上，利用方形截面床內構件簡單易實現的優點，在床中部安裝對稱構件，考察對稱內構件對兩相流動行為的影響。

34 、FCC performance of CHV 1、LV 23 and an imported catalyst was tested using XTL 5 riser pipe pilot plant.───利用XTL-5型提升管中試裝置，對抗釩催化裂化催化劑CHV-1、LV-23及進口劑的裂化性能進行了評價。

35 、On Riser Design of Die Casting───關于金屬型的冒口設計

36 、Severe slugging usually occurs in a gas-liquid two-phase flow system where a riser is followed by a pipeline segment with a downward inclination angle.───嚴重段塞流主要出現在下傾管段、緊接有一上傾管段或立管段的氣、液兩相混輸海底管道中。

37 、According to the proportional solidification theory to adopt non-riser design on it, the feeding result does the same as the riser does.───為提高工藝出品率,生產中按照均衡凝固理論進行無冒口工藝設計,取得用冒口補縮同樣的效果。

38 、The prefabrication of riser in nozzle section, the prefabrication of nozzle easing, the welding of easing &riser and the installation of nozzle were introduced in detail with this paper.───其噴嘴為改造的重要部分,采取噴嘴套筒與提升管整體預制的方法,達到了預期的效果。

39 、Lyrics and Music by James Dean, Paul Riser, &William Weatherspoon Recorded by Vonda Shepard...───五月天 小太陽 陳小春 獨家記憶 愛樂團 死而無憾 東來東往 唱情歌的人 俞灝明&簡美妍...

40 、Riser cables-Sectional specification───垂直布線電纜分規范

41 、After canceling the cold riser the shrinkage problem was successfully solved.───取消冷冒口后,縮孔問題成功地得到解決。

42 、The ratio of downcomer to riser cross sectional area, the bottom clearance and the ratio of height to diameter of the reactor are proved to be important of the cell growth behavior.───下降室和上升室的截面積比，底部系數，高徑比這些幾何參數和表觀氣速都與細胞的生長緊密相關。

43 、Attach the riser tensioners, choke and kill lines to the slip joint.───將隔水管張力器、壓井及放噴管線連接到伸縮節上。

44 、It was found that gas injection at riser base could eliminate the severe slugging and stabilize the gas and liquid flow rates at the riser outlet.───實驗結果表明,采用上升管下部注氣的方法可以消除嚴重段塞流現象,實現管道出口氣液的穩定流動,減小系統的最高壓力,同時可以防止上游水平管內出現高頻率的長液塞流動。

45 、Introduced is the experience in replacing atmosperic riser with thermal-isolation riser and improving pouring system to eliminate shrinkages.───介紹了用保溫冒口代替大氣壓力冒口，改進澆注系統解決鑄件縮孔問題的經驗。

46 、A new casting technology of large runner body, which reduces the amount of steel for riser is introduced, and it has been verified by computer simulation.───介紹了大型轉輪體的新鑄造工藝方法,在保證鑄件質量的前提下,提高冒口的補縮效率,減少冒口的鋼水量。

47 、ONLINE OBSERVATION FOR UNMEASURABLE INPUTS IN FCCU RISER───催化裂化提升管反應器不可測輸入的在線觀測

48 、The child rises early and makes him an early riser for life.───孩時起得早,這使他終生早起。

49 、The catalytic cracking unit in Changqing Petrochemical Branch Company,CNPC was revamped successfully by using of two-stage riser FCC(TSRFCC)technology.───中國石油長慶石化分公司采用兩段提升管催化裂化(TSRFCC)技術成功地對其催化裂化裝置進行了改造。

50 、Compared with conventional steel riser (SR), AAR has better VIV fatigue characteristics.───與常規鋼制隔水管(SR)相比，鋁合金隔水管具有較好的VIV疲勞特性。

51 、How to Become an Early Riser───如何成為一個起早者

52 、Adjust the riser tensioners as required.───將隔水管張力裝置調整到所需張力。

53 、XII. Other issues in agreement:Endowing six copper hammers, foundation bolts, iron riser blocks, cups for charging.───十二,其它約定事項:每臺壓鑄機配地腳螺絲及調整墊鐵各壹套,三臺機共配六個銅制錘頭及六個料杯.

54 、So several new deep water drilling riser systems have been studied and applied to drill the deep water wells.───因此,國外開發出了幾種新型的深水鉆井隔水管,并且在一些油田已經得到了應用。

55 、To make the suspended straws burn completely in the riser of circulating fluidized beds,lean phase zone should be high and suitable enough in straw burned circulating fluidized bed boilers.───對于秸桿燃燒循環流化床鍋爐,需要有足夠高的懸浮段并且懸浮段有一定的顆粒數量濃度以保證易懸浮的秸桿能夠在提升管內充分燃燒。

56 、The effect of the aeration to the pyrolysis chamber on the pressure distribution of the standpipe was more remarkable than on the riser.───加到熱解室內的松動氣對立管內的壓力分布影響較大，而對提升管內的壓力分布影響相對較?。?/p>

57 、Utilizing peculiarities of platform cluster well groups the cross operation technique of riser pipe, surface and oil formation is executed to improve drilling efficiencies.───充分利用平臺叢式井組特點，施行隔水管、表層及油層交叉作業工藝，提高了鉆井效率；

58 、In floating offshore operations, the choke and kill lines exit the subsea BOP stack and then run along the outside of the drilling riser to the surface.───在進行浮動的海上作業時，節流和壓井管線從水下防噴器組出來，之后沿鉆井隔水導管外側面到達水面。

59 、Multimode Riser Rated Single Fiber Cordage───多模主干單根光纖

60 、two-stage riser fluid catalytic cracking───兩段提升管催化裂化

61 、The gas holdups both in the riser and the downcomer slightly decreased with an increase in superficial liquid velocity.───各級內上升管和下降管的氣含率均隨表觀液速的增大而減小，但影響程度較小。

62 、But you, you were always an early riser.─── 可你呢 你總是早早地就醒了

63 、Based on this, the effect of downcomer diameter and height in the reactor were investigated, liquid circulating velocity and gas hold-up in the riser increased with draft-tube diameter.───在此基礎上，使用計算流體力學模擬的方法考查了反應器內的導流筒直徑和導流筒高度對反應器內兩相流動的影響，導流筒直徑增大，液相循環量增大，上升段氣含率增大；

64 、Attach the riser tensioners , choke and kill lines to the slip.───將隔水管張力器，壓井及放噴管線連到伸縮節上。

65 、I knew you were an early riser, so I thought I'd join you.─── 我知道你起得早 所以我也早點起來

66 、Using the Deft spray can I spray the limb tips and work my way up to the riser.───使用靈巧的噴壺I 浪花肢體技巧和工作我的方式由造反者決定。

67 、STUDY ON OPTIMIZATION OF TECHNICAL PARAMETERS FOR RISER REACTOR───優化提升管反應器技術參數研究

68 、Carried out using the grinding wheel circumference, used to eliminate glitches, polished to small and medium sized castings poured riser, grinding welds and so on.───使用砂輪圓周進行磨削，用于消除毛刺、磨平中小型鑄件澆冒口，修磨焊縫等。

69 、Fracture mechanical analysis of riser nodes of offshore platform at low temperature.───低溫環境下海洋平臺管節點的斷裂力學分析。

70 、REVAMPING DCC UNIT FOR RISER REACTOR OPERATION───DCC裝置改造為全提升管操作

71 、Contains stairs, elevators, escalators, restroom fixtures, and a safe. Use for structural diagrams, bathroom layouts, building automation, architectural drawings, and riser diagrams.───包含樓梯、電梯、自動扶梯、洗手間設施和保險箱。用于結構圖、衛生間布局、構建自動化、結構繪圖和豎板圖。

72 、He is an early riser.───他是個早起者。

73 、The control principle and structure of the riser are discussed;the software and hardware of the triggering control are described.───對調速器的控制原理及結構組成進行了介紹,并對觸發控制的硬件和軟件進行了敘述。

74 、By reasonable useof kiss riser,highg quality of these castings and higher casting yield can be obtained.───合理使用壓邊澆冒口，有效地提高了有色合金鑄件的質量和工藝出品率。

75 、Technique character , riser design, tilting height and deformation avoiding of casting in tilting pouring casting process for cast steel has been introduced with examples.───對傾斜澆注工藝特點、冒口設計、傾斜高度和防止鑄件變形等作了詳細介紹并舉出應用實例。

76 、It has been found out that the defect was caused by adopting the foundry method with a cold riser which actually acted as a cold metal bleeder.───業已查明,缺陷是由于采用冷冒口工藝所致,因為冷冒口實際上起排放冷鐵液作用。

77 、The comparison with the recent experiment carried out by Chaplin et al on a vertical(tension) riser in stepped current shows the validity of the proposed model.───與近期階梯狀來流作用下立管渦激振動實驗結果的比較顯示,本文模型是有效的.

78 、The CAD system of casting process, including processing parameters, riser and gating system design modules,has been developed based on UG molding software.───在UG造型軟件基礎上開發了鑄造工藝CAD系統,包括工藝參數設計、冒口設計和澆注系統設計等模塊。

79 、Based on the calculated results, the fatigue damage by vortex induced vibration along a riser is predicted.───在此基礎上計算了立管沿長度方向渦激振動引起的疲勞損傷。

80 、ventilated commutator riser motor───升高換向片通風的電動機

81 、EFFECT OF INTERNALS ON GAS DISPERSION IN HIGH DENSITY RISER───內構件對高密度提升管內氣體混合行為的影響

82 、Run the pin connector and riser.───下銷釘連接器和隔水管。

83 、Riser cables-Blank detail specification───垂直布線電纜空白詳細規范

84 、We evaluated novel catalyst-CXM-03 with small scale riser test unit for FCC and examined its commercial application at FCC plant.───對新型高效催化裂化助劑CXM-03的小型提升管催化裂化試驗裝置進行了評價,并在一催化裝置上進行了工業應用。

85 、Load out Contractor's riser at Zhanjiang anchorage.───在湛江錨地把承包商的隔水管裝上平臺。

86 、If you are getting dragged, grab one riser, a line or material and pull.───如果你在地面被傘倒拖,抓住任何一條主提帶或一條繩子用力拉它。

87 、The axial and lateral mixing behaviors of solid particles in a riser with blunt internals were studied.───對加設了鈍體式內構件的提升管內顆粒的軸徑向混合行為進行了研究。

電源RMC是什么意思

RMC 是 riser management controller 的縮寫，也就是升降平臺電源管理控制器。它主要用于控制電動升降臺的上升、下降和各種布局操作。這種電源管理器通過串行接口與電動升降平臺通信，可直接連接至200個升降平臺。RMC 是當今電力管理的首選，它可以為您的電動升降平臺提供安全和高效的電源管理服務。

RMC 具有多種功能，不僅可實現電動升降平臺的安全控制，還可實現故障自診斷和錯誤處理。當電子升降臺達到其最高或最低位置時，RMC 立即停止電源，這保證了升降平臺的安全。此外，RMC 在執行電動升降平臺操作時，會通過自診斷功能檢查電機驅動器和控制裝置是否正常工作。

由于電動升降平臺具有廣泛應用，RMC 正變得越來越重要。與傳統的電源管理系統相比，RMC 大大提高了設備的安全性和可靠性。此外，它還能夠極大地提高升降平臺的使用壽命，降低設備故障率?？傊?，RMC 為電動升降平臺的電源管理提供了一種安全、可靠、高效的解決方案。

我要手指滑板和滑板的招式名稱

手指滑板和滑板的招式名稱有：

Street tips 街式 

ollie 翱驪 豚跳 帶板騰空 

360 flip 大亂 踢翻360 

360 shovit 倒板一圈 

5-0 grind 次后橋 5-0 

50-50 grind 次橋 次軸 50-50 

50-50 shovit out 次橋倒板下 

boardslide 騎肋 

f/s boardslide 倒騎肋 

f/s boardslide shovit out 倒騎肋倒板下 

bluntslide 騎輪 次輪 

hardflip 難翻 

heelflip 跟翻 腳跟翻 

k-grind K次 酷K 

kickflip 翻板 

f/s kickflip 外跳轉翻板 帥式 

noseslide 次板頭 

frontside 外跳轉 

backside 內跳轉 

b/s lipslide 內跳轉過杠騎肋 

manual 二輪平衡 后二輪 

nose manual 前二輪 

nollie flip 踩頭翻板 nollie翻板 

nosegrind 次前橋 

pop shovit 倒板 

tailslide 次板尾 

tailslide to fakie 次板尾變倒滑 

fakie 倒滑 

double flip 翻板兩圈 

varial kickflip 小亂 翻倒板 

varial heelflip 腳跟小亂 腳跟倒翻 

finger flip 手翻板 

switchstance 或 switch 反腳