?abrasion

abrasion發音

英：[?'bre??n]　　美：[??bre??n]

英：　　美：

abrasion中文意思翻譯

n.擦傷, 磨損, 磨損處

abrasion常見例句

1 、Frosting occurs when two fibers differing in both color and abrasion resistance are combined in a fabric.───兩種顏色和耐磨損性能不同的纖維組合的織物也會出現霜花色。

2 、Photo Gallery: Dubai Sights The driver of an abra, a traditional wooden boat that ferries passengers across Dubai Creek, takes a break.───意譯：迪拜風光圖片集。駕駛員的一艘abra,一種傳統的木制小船運載旅客越過迪拜小港，但已經倒閉。

3 、Our company will attend Abra Health 2008 in Dubai from Jan. 28-31. 2008.───我公司將于2008年1月28號至31號參加2008阿拉伯醫療設備展（迪拜）。

4 、However, if the yarns are packed too tightly, the fabric will have reduced tearing strength, abrasion resistance and wrinkle recovery.───但是,如果紗線密度過大,織物的撕裂強度、耐磨強度及折皺恢復能力會降低。

5 、The impact abrasion mechanism is a combined process of impact plastic deformation wear, cutting wear and f...───其沖擊磨損機理是沖擊塑性變形磨損、切削和破裂共同作用的過程。

6 、The rivet heads on the bucket are in good condition and without severe abrasion.───扣件鉚釘釘頭狀況良好，并無嚴重磨損。

7 、To erode or be eroded by abrasion.───侵蝕通過磨損而侵蝕或被侵蝕

8 、The national-grade new product TMC nylon is a new type material with abrasion proof, antifriction, and high PV value.───TMC尼龍是一項國際新型耐磨減摩高PV值材料，國家級新產品，具有高機械強度、抗壓、抗沖擊、耐磨、減摩、吸振、防腐、自潤滑且性能穩定等獨特的良機械特性。

9 、The driver of an abra, a traditional wooden boat that ferries passengers across Dubai Creek, takes a break.───意譯：迪拜風景名勝圖片。一艘阿布拉的駕駛員，傳統的木船渡船乘客橫越迪拜小溪，他休息一會兒。

10 、An abrasion on the inferior margin of the mandible.─── 我在下頜骨的下緣發現一處磨損

11 、Based on the turbulence theory,formulas are derived for predicting the abrasion rate of concrete material wall surface.───基于紊流猝發理論,建立了混凝土材料壁面磨蝕率的計算公式;

12 、There were a number of abrasions in her uterine lining.─── 她的子宮內膜上有大量的擦傷

13 、Abrasion detection of pantographic slipper when locomotive entering warehouse[J].───引用該論文 羅鵬,王澤勇,高曉蓉,王黎,趙全柯.

14 、It's when he damns you with faint abrasion that the alarm bells should ring.───因?yàn)檫@是他準備責備你之前的警鐘。

15 、The scr atch, cold welding and abrasion are three kind of thread failure.───擦傷、冷焊和粘著摩損是粘扣失效的三種類型。

16 、Give me a bandage for an abrasion.───我擦傷了，給我繃帶。

17 、The ABRA genes of isolate FCC1/HN and other isolates share quite high homology.───FCC1/HN株與其它分離株ABRA基因有很高的同源性。

18 、The present status of roll abrasion model was summarized,the typical roll spalling predicting model was int...───對軋輥的損傷和繼續研究工作具有一定的參考價值。

19 、You have a slight epidermal abrasion on your forearm.─── 你的小臂上有輕度表皮擦傷

20 、The traditional wooden boats known as abras convey workers across Dubai Creek.───意譯：迪拜城市生活圖片。傳統的木船通稱阿巴拉運輸工人橫過迪拜小溪。

21 、But before that they’d suffer the abscission and abrasion of their flesh to learn of any more collaborators.───但在此之前，他們可能會飽受切割及磨刮皮肉的痛苦，以便（人家）能了解到更多的同伙。

22 、Objective: to observe the efficacy of skin regeneration technique in treating skin abrasion.───摘要目的：探導濕性皮膚再生技術治療皮膚擦傷的療效。

23 、It cures to a hard and tough film., Resistant to abrasion and impact.───具有漆膜堅韌、耐磨、耐碰撞等特點。

24 、A minor scratch or abrasion.───擦傷一個輕微的擦傷或磨損

25 、Effect of microelement on the microstructure and wear resistance property of special brass have been investigated by SEM, abrasion machine etc.───利用電子探針、磨損試驗機等試驗手段,研究了微量元素對特殊黃銅的組織和耐磨性能的影響.

26 、Methods of test for ancillary components for masonry - Part 13: determination of resistance to impact, abrasion and corrosion of organic coatings.───圬工用的輔助構件的試驗方法。第13部分:有機涂層耐沖擊性、耐磨性及耐腐蝕性的測定。

27 、The absence of V-belt avoids the ends since belt abrasion and spooling etc.───因本機不用V型皮帶，克服了因皮帶磨擦而掉落的料屑污染、皮帶纏線等問題。

28 、The effect of abrasion,soaping and brushing on its reflective property are also discussed.───并討論了摩擦、皂洗、刷洗對反射性能的影響。

29 、Abrasion of bone and generation of metal debris can result when a roughened or grit-blasted surface is used.───如果采用粗糙面或噴砂面假體，骨質會被刮傷并產生金屬碎屑。

30 、Good solvent and abrasion resistance, medium flexibility.───優良的耐溶劑性、耐磨性，中等的柔韌性。

31 、Hi-grinding force and smooth abrasion.───切削力強，且研磨力均勻。

32 、High-strength, impacting resistance, erosion resistance and abrasion resistance. Using for roof, gate and burner of EAF.───強度高，抗沖擊、抗沖刷、耐磨損。用于電爐頂，各種爐門、立柱、橫梁、燒嘴等。

33 、To wear a surface away by weathering, abrasion, or foreign particle.───因天氣或外來顆粒等原因?qū)е卤砻姹荒ノg。

34 、In the meantime, Shinsei is revising its own proposal to persuade the other Japanese banks to join Abra.───與此同時,新生銀行也在修改自己的建議,以便勸說其它日本銀行加入阿根廷債券重組機構。

35 、There is abrasion of your nasal mucus membrane.───您的鼻粘膜有擦傷。

36 、Each pair features antiqued metal hardware, genuine abrasion patterns, and destruction.───官方市場價格合人民幣3180元。

37 、A variety of coatings may be provided on request to resist corrosion or abrasion.───可以根據耐腐蝕或耐研磨要求提供各種涂層。

38 、A: Si cada uno puede traer dos botellas libres de impuestos Abra su maleta,por favor.───對每人可以帶兩瓶免稅的酒。請打開手提箱好嗎？

39 、It's the same blow to the head, but no cuts, no abrasions.─── 也是頭部遭襲 但是沒有割傷也沒有瘀傷

40 、sorry if I was being a little abrasive.─── 如果我之前有些傷人 很抱歉

41 、Abra las ventanas de Windows, las ventanas en Windows, apagar Windows.───開窗口在視窗,窗口在視窗,關機閉視窗.

42 、"The interest in Abra's structure has risen again since Dubai, both in Japan and in Europe," he said.───“迪拜會議以來，日本和歐洲的投資者再次提高了對阿根廷債券重組機構的興趣。”他說。

43 、No, just a *all abrasion on his arm.─── 沒有 只是手臂上有一點擦傷

44 、Adhesive wear is the main abrasion mechanism of composite in high sliding speed and heavy-load.───在低速低載時，復合材料的磨損以犁削磨損為主，在高速高載時，復合材料的磨損以粘著磨損為主；

45 、Those abrasions on his neck they're fresh.─── 脖子上的那些擦傷 是新的

46 、The abrasion, press and rigidity of squeegee determine the print quality.───刮板的磨損、壓力和硬度決定印刷質量。

47 、EPDM has good abrasion and tear resistance and offers excellent chemical resistance to a variety of acids and alkalines.───EPDM具有良好的抗磨損和抗撕裂性能,以及優秀的抗酸堿化學腐蝕的性能。

48 、With excellent colour retention. Resistant to splashes of mineral oil, animal and vegetable oil and sea water. Also resistant to abrasion and impact.───保色性極佳。耐礦物油、動植物油及海水噴射濺污染,也耐磨損或碰撞。

49 、Hard surfacing of abrasion resisting mechanical parts.───堆焊要求耐磨的機械部件。

50 、Professional side abrasion and polishing equipment ensures even polishing of chamfer.───專業的磨邊拋光設備，每條邊倒角拋光勻稱，無拋漏；

51 、The coating has properties of excellent adhesion, good mechanism performance. Good flexibility, good resistance to impact, good abrasion resistance.───具有極強的附著力和優良的機械物理性能，柔韌性好、抗沖擊強度高，耐磨性能強。

52 、It features tough film, resistance to abrasion and weather, strong adhesion, easy application.───具有漆膜堅硬、耐磨、耐候、附著力強、易于施工等特性。

53 、Therefore t he CO 2 corrosion and the impaction and abrasion of high speed gas flow are the main causes making the grooves be formed and expanded.───因此 ,CO2 腐蝕及高速氣流撞擊磨蝕是造成溝槽產生和擴展的主要原因。

54 、Industry using shows the life of abrasion resistance blade of LPCC is over five years.Figs 3,tables 2 and refs 5.───工程應用的結果表明，百葉窗濃縮器抗磨葉片使用壽命可以達到5年以上。

55 、The product are resistant to corroion ,oil ,abrasion ,thermal conductance,shock,absortive to sound and nonconductive .───產品具有耐腐蝕、耐油、耐水、耐磨、抗熱導、抗振、吸音、不導電等特性。

56 、As a result, our relationships are filled with unnecessary friction (abrasion; discord) and conflict.───我們都忘了男人和女人應該是不同的，結果我們的關系充滿了不必要的摩擦與沖突。

57 、Good water resistant bottom drainer •Reversible operation by button control, high density abrasion wheel grin...───型號: BL-1001 . 品牌: 博覽 . 原產地: 中國 . 產品描述: Original external shape •

58 、The fibers with moderate abrasion resistance include wool, cotton, and the high wet-modulus rayons.───具有中等耐磨損性能的纖維有羊毛、棉花和高濕模量粘膠纖維。

59 、Compared with steel 45,the working life of the prehardened plastic-mould steel cutting tool is shorter,with the main wear form being grinding abra...───與45鋼相比,這類模具鋼的刀具耐用度較差,且刀具主要磨損形態是磨料磨損。

60 、The high hardness and toughness in the abrasion resisting steel after quenching and tempering two times is due to bainite formation in the l...───在二次加熱淬火回火中出現高硬度、高韌性值,是因?yàn)橐r板淬火過程中在具備貝氏體生成的冷卻速度下生成了貝氏體組織。

61 、MEBO is suitable for treating extensive abrasion and contusion in face complicated by foreign body incarceration.───對面部廣泛擦挫傷合并異物嵌頓的病人，最為適用。

62 、Hammer head made of AMC.“Big gold tooth” super hammer head.It can be used in hard condition of serious abrasion.───AMC（超高錳/鎢鈦合金復合材料）復合材料錘頭，商品名“大金牙”超級錘頭，它適應在嚴酷磨料磨損條件下工作。

63 、Other than abrasions, I'm not seeing any injuries.─── 除了擦傷 我沒看到其他傷處

64 、Lagrange interpolating formula was applied estimate to the size of abrasion defects by experiments.───建立了基于**值法的偏磨缺陷的定量分析方法,并給出了實測結果。

65 、Nylon with very good abrasion resistance, peripherin-cured career Cup or blade of repeated friction.───尼龍具有非常好的耐磨性，感光固化后能夠勝任油盅或刮刀的反復摩擦。

66 、Photo Gallery: Dubai Sights On bustling Dubai Creek, traditional abras (water taxis) still ferry locals and ships carry trade goods.───意譯：迪拜風光圖片集。在繁忙的迪拜小港，傳統的abras（水上出租車）仍然是局部的渡船和船隊運載貿易的貨物。

67 、According to incomplete statistics, about 1/3 or 1/2 of the consumption of the energy is caused by friction and abrasion.───據不完全統計，能源的1/3到1/2消耗于摩擦與磨損；

68 、Adhesion test using cellophane tape and abrasion test using Tabore Abrasion Tester in the quality control of curtain wall glass are also discussed.───對比了膠帶紙剝離法和Tabor磨耗測試法在幕墻玻璃質量控制中的作用.

69 、The morphology of abrasion surface and the mechanism of abrasion breaking are investigated by TEM, SEM.───借助于TEM、SEM及紅外光譜研究了磨損表面的微觀形貌及磨耗的斷裂力學機理。

70 、Continuous foaming process with high foaming intensity; It has excellent chemical resistance and abrasion resistance.───發泡密度高且采用連續發泡式發泡，具有優良的耐酸堿性，耐久性。

71 、For measuring abrasion of catalyst particles, three basic attrition test apparatus are used.───為了測定催化劑顆粒的磨損，可使用三種基本磨損測試裝置。

72 、We rubbed and my name came off all right, but in the process of removing it, we left an abrasion on the chalkboard.───我們擦呀擦呀，終于把我的名字徹底給擦掉了，但是在擦洗的過程中，我們?cè)诤诎迳狭粝铝艘恍K磨損的痕跡。

73 、An appropriate abrasion wheel microsection shoule be Renewed to sharpen different materials saw blades.───對硬質合金鋸片時,只需更換合適的砂輪磨片.

74 、Therefore, it is crucial to detect the abrasion of wheelsets accurately.───因此準確的檢測車輪的磨耗狀況是非常重要的。

75 、Performs brilliantly on stainless and even better on our Ductile Iron brake rotors. Plus very low abrasion as well.───在不???碟盤上表現很贊,在我們的鑄鐵碟盤上表現更是贊上加贊,且摩耗性也低.

76 、The firm inner parts structure has good abrasion resistance.It has water attack resistance and can bear very highdamaging force and last long.───堅固的內件機構具有良好的耐磨性,可抗水擊和承受極高的破壞力,使用壽命長。

77 、The pressurizing roller contains instant rebounding devices which could avoid abrasion of yarn.───壓輥設有阻尼加壓和瞬間回彈裝置，以避免紗面的磨損。

78 、The wear mechanism of stainless steel against copper based sintered alloy is mainly attributed to adhesion,abrasion and oxidation.───不銹鋼/銅基燒結合金材料的磨損機制主要是粘著磨損及氧化磨損。

79 、In the experiment under the 20 m/s wind tunnel conditions, the wind abrasion modulus is almost zero.───在每秒20米的風洞實驗中，吹蝕模數幾乎為零。

80 、The title modified epoxy abrasion resistant coatings is a erosion resistant coatings on metals.───改性環氧耐磨涂層是一種抗沖蝕磨損的金屬基涂層。

81 、The abrasion resistance of urethane acrylate resin/silica hybrids can be improved at low silica content.───在無機物含量較低時，聚氨酯丙烯酸酯／二氧化矽雜化體系光固化膜的耐磨性略有提高。

82 、Outstanding lubrication abrasion resistance energy,for engine by comprehensive protection.───優異的潤滑抗磨性能，給發動機以全面的保護。

83 、Also, severe biofouling, physical abrasion, and chemical etching of the glass may erode the sensing surface.───嚴重的玻璃生物淤積、物理磨損和化學腐蝕可能影響感覺表面。

84 、Yeah, the abrasion marks aren't very textured.─── 是的 這些瘀傷上沒什么紋理

85 、For extrudates there are side crushing strength tests, bulk crushing strength tests, abrasion tests.───對擠條產品有側壓強度的測試，堆積強度測試和耐磨測試。

86 、A series of contrastive experiments on the cobalt based composite coatings and the 45 hardened steel are fulfilled by a pin-on-disc abrasion machine.───應用盤銷式摩擦磨損試驗機對復合涂層材料和淬火態 45鋼進行了磨損對比試驗。

87 、The effect of artificial simulated seawater on the abrasion resistance of wood/plastic composite (WPC) was studied.───摘要研究了人工模擬海水條件對塑木復合材料耐磨性能的影響。

88 、The type of Complex Wave formed due to the abrasion is very divergently shaped.───后天磨損所導致的雜波型鱗片形態多樣性突出。

89 、To make(the skin) sore by abrasion; chafe.───使擦傷由于擦傷而引起皮膚疼痛；擦傷

90 、You'd expect there to be abrasions on his hand, but there are none.─── 他的手上應該能看到瘀傷 但是沒有

風蝕與磨蝕形成地貌的差異？

風蝕地貌，是經由風和風沙流對土壤表面物質及基巖進行的吹蝕和磨蝕作用所形成的地表形態。風蝕作用形成風蝕地貌。

風的吹蝕作用和磨蝕作用是同時進行的，兩者相互是風蝕作用的有機結 合體。無吹蝕作用吹起砂粒，根本談不上磨蝕作用，而風沙的沖擊、磨損反過來也加強了 吹蝕作用。但在不同的條件下，吹蝕和磨蝕的表現是不一樣的，在基巖裸露地區，磨蝕作 用較為明顯；而在沙土覆蓋地區，吹蝕作用就顯得更為突出。

風蝕與磨蝕形成地貌的差異？

風蝕地貌，風和風沙流對土壤表面物質及基巖進行的吹蝕和磨蝕作用，所形成的地貌類型，稱為風蝕地貌。

我國風蝕地貌主要分布區在青海柴達木，南疆和田、羅布泊，東疆哈密、吐魯番，北疆克拉瑪依附近地區。

磨蝕作用(abrasion)：風攜帶的沙粒對地表巖石的沖擊、磨擦使其破壞的作用。因風的含沙量具明顯的垂直分帶性，絕大部分沙粒集中在距地面30 cm 范圍內，尤其是10cm以下范圍，故風的磨蝕作用主要發生在30 cm的高度內。如電線桿近地表處變細等。