?impregnation

impregnation發音

英：[??mpreɡ'ne??n]　　美：[??mpreɡ'ne??n]

英：　　美：

impregnation中文意思翻譯

n. 受孕, 受精, 注入, 浸漬

impregnation詞形變化

動詞過去式: impregnated | 動詞過去分詞: impregnated | 動詞第三人稱單數: impregnates | 名詞: impregnation | 動詞現在分詞: impregnating |

impregnation常見例句

1 、The impregnation process and densification efficienty of pitch precusor and resin precursor are investigated,at the same time, the similarity and difference of two methods are compared.───探討了瀝青浸漬和樹脂浸漬的浸漬過程和增密效果，比較了兩種浸漬方法的相似之處和不同之處。

2 、Strength properties: Provided the treated timber is redried after impregnation, the treatment with ACQ-DB does not influence any strength properties of the timber.───力學性能：ACQ-DB防腐木材干燥后，木材的任何力學性能不會受到損失。

3 、Diotrol Aqua Natural Oil Impregnation───水性滲透底油

4 、Unfilled clear epoxy with low viscosity for general purpose casting and impregnation, exhibiting excellent electrical and physical properties.───無填充料的環氧樹脂,透明,低粘度,通用的涂覆灌注材料,有著優秀的物理及電氣性能。

5 、Easily pourable casting material, the convenient mixing ratio, has a UL Flame Rating of 94V-0, for general purpose casting and impregnation.───易澆注的灌封材料，簡單的混合比率，UL94V-0認證，廣泛應用于通常的設計與制造。

6 、There are also: tailoring, welding, painting, sandblasting, the entire flat, polished, galvanized, IMPREGNATION, vol circle forming, anodizing, coloring, such as technology and equipment.───另外還有：剪裁、焊接、噴漆、噴沙、整平、拋光、鍍鋅、浸塑、卷圓成型、陽極氧化、著色等工藝和設備。

7 、From the Pt loading and catalyst activity, the conditions of the electrolytic impregnation were studied.───從催化劑的負載量和催化活性出發,對電解負載的實驗條件進行了探討。

8 、Vacuum impregnation is a technology to modify materials or reach some special demand as the effect of vacuum and impregnation.───摘要真空浸漬是通過負壓作用和浸漬作用，改善材料性能或滿足某種特定要求的工藝技術。

9 、Cotton gloves, nylon gloves, cotton gloves, IMPREGNATION gloves, a finger, acid, rubber gloves. all leather gloves, TC white gloves, canvas gloves.───棉布手套、尼龍手套、棉紗手套、浸塑手套、指套、耐酸堿膠手套、全皮手套、TC白手套、帆布手套;

10 、I would like him to witness as I impregnate his love.─── 我要他親眼看見我讓他的新娘**

11 、speculum for artificial impregnation, vaginal───人工授精用開腔器

12 、It is considered that the content of sulfurizing agent, drying temperature in impregnation, and sulfurization temperature and hydrogen pressure in sulfurization were main factors influ...───并對加氫催化劑器外預硫化技術的研究方向提出建議。

13 、This paper studies the in-situ toughening of the alumina foamed ceramics from the perspectives of percentage of water absorption of biscuits,viscosity of sol and impregnation technique.───從素?zé)黧w吸水率、溶膠粘度、浸漬工藝三個方面對氧化鋁質泡沫陶瓷的原位增韌進行了研究。

14 、catheter for artificial impregnation───人工授精用導管(獸醫用)

15 、The impregnation of resin for fiber reinforcement process is a very important phase in RTM.───RTM成型過程中,樹脂對纖維增強體的充分浸潤是非常重要的一環。

16 、The process to enhance anti-oxidation property of the pure graphite ma terials by impregnation with phosphates and its influence factor were investigat ed.───主要介紹了采用浸漬**酸鹽溶液的方法來提高高純石墨材料抗氧化性的工藝研究和影響因素。

17 、The effect factors on RTM microscopic impregnation process were analyzed with help of dimensionless analysis.───借助無量綱分析,研究了RTM工藝微觀浸潤過程的影響因素。

18 、Melt flow through glass fiber mat during GMT melt impregnation [J].Acta Materiae Compositae Sinica, 2000, 17(3): 28-32.───GMT熔融浸漬中熔體在玻纖氈中的流動[J].復合材料學報,2000,17(3):28-32.

19 、It has performed reliably when used at very high retentions in full-cell impregnation processes.───當用滿細胞法使它具有很高的保持量時,它的使用是很可靠的。

20 、Subsequent to the pre-washing zone, impregnation of the fabric with scouring and bleaching chemicals takes place.───在預水洗區之后，織物浸漬以煮練劑和漂白劑。

21 、precursor impregnation procedure───前體浸漬法

22 、The concept of telegonic impregnation was expressed in Greek mythology in the origins of Greek heroes.───亞里士多德相信這個理論，而在中世紀對亞里士多德的再認識中，這個理論又復蘇了。

23 、Zona pellucida (ZP) plays a key role in the recognition, combination and penetration of sperms and oocytes, the prevention of multiple impregnation, the protection of embryos, and so on.───卵透明帶(ZP)在精卵識別、結合、穿透以及阻止多精受精和保護著床前胚胎等方面起關鍵作用,與男性生育關系密切。

24 、polymeric sponge impregnation process───有機泡沫浸漬

25 、Experiments were carried out in Great Britain and American on the impregnation of wood with vegetable tars and extracts.───在大不列顛和美州就進行過用植物焦油和提取物來浸漬木材的試驗。

26 、I trust you're not the one who impregnated my granddaughter.─── 你不是搞大我孫女肚子的那個人吧

27 、In this paper the current development of carbon-graphite materials with glass impregnation, its excellent per fomance, production process, and application were introduced.───介紹了浸玻璃碳石墨材料的發展現狀、所具有的優異特性、制造工藝以及應用實例等。

28 、The activation of terres rares in aluminum impregnation changing with temperature,and the effect on seeping depth are discussed.───對滲鋁中稀土的活化作用隨溫度的變化及對滲層深度的影響等進行了探討。

29 、incipient-wetness impregnation method───Co-Mo／γ-Al2O3

30 、coprecipitation and wet impregnation───共沉淀-浸漬法

31 、One can recover about 76% of the total SO2 initially charged for chip impregnation.───可回收的總二氧化硫(total SO_2)量約為木片浸漬液中原加入總二氧化硫量的76%。

32 、In this paper,the current situation,production equipment,working principles and future trends of paper drying technology of MF resin horizontal impregnation are introduced.───本文著重介紹了生產三聚氰胺樹脂浸漬紙所使用的臥式浸漬干燥技術發展?fàn)顩r，生產線結構組成及工作原理，提出了浸漬干燥技術今后的發展方向。

33 、Keywords co-precipitation;impregnation;isobutylene;methacrolein;───共沉淀法;浸漬法;異丁烯;甲基丙烯醛;

34 、Stick film Vertical impregnation machine───履膜紙立式浸漬機

35 、This article firstly expatiated the conception of Impregnation,analyzed how to use PLC to realize.───本文首先闡述了浸滲的概念、分析了浸滲線PLC自動控制的原理。

36 、The new impregnation equipment and process, which can meet the requirement of high temperature, high pressure and environment protection, should be widely used in refractory industry.───指出今后應積極倡導**應用高溫、高壓,符合環保要求的真空油浸工藝及裝備。

37 、It is proved by practice that silane impregnation can improve substantially the corrosion resistance of marine reinforced concrete.───實踐表明，硅烷浸漬能顯著提高海工鋼筋混凝土結構的防腐蝕性能。

38 、The electrochemical impregnation (ECI) in ethanol-water solution is of great value for application.───乙醇-水溶液二元體系電化學浸漬具有很高的實用價值。

39 、superfine impregnation Au deposit───微細浸染型金礦床

40 、In order to obtain the preferable impregnation performance and reduce the cost of C/C composite, much attention should be given to the factors of fluidity, viscidity, soft point etc.───為獲得較好的浸漬性能，在提高瀝青殘?zhí)柯实耐瑫r(shí)，應兼顧其流動性、粘度和軟化點等因素，以減少浸漬次數，降低C/C復合材料的成本。

41 、impregnation and compression petroleum coke───浸漬壓密石油焦

42 、CNI is Chemical Nickel Impregnation with TFE overcoat.───CNI經過化學鎳浸漬，并涂敷聚四氟乙烯。

43 、Incipient wetness impregnation───浸漬

44 、Furthermore, it was found that the microwave pre-drying was better than that of the hot-air pre-drying, both in the mass of vacuum impregnation and in the loss of nutrients.───并比較了不同的干燥方式對真空含浸量的影響和對營養物質流失的影響，發現微波干燥的效果優于熱風干燥。

45 、reservoir impregnation observation───庫區浸沒觀測

46 、The catalyst prepared by impregnation method had good performance in both activity and selectivity,and contained 0.8 molar ratio of chrome and vanadium and 1.2 molar ratio of phosphorus and vanadium and with activated alumina as support.───在鉻釩摩爾比為0.8、**釩摩爾比為1.2、以活性氧化鋁為載體的條件下,采用浸漬法得到的CrVPO型催化劑性能最好.

47 、This paper introduces the general developent of vacuum - impregnants, particularly in terms of the heat curable impregnation sealants, their compositions and impregnating process.───本文簡述了真空浸滲劑的發展概況,著重介紹了其中的熱固化浸滲劑及其組成和浸滲工藝。

48 、organic precursor impregnation method───有機泡沫浸漬法

49 、Activity of the catalyst was eveluated with SO_2 hydrogenation and H_2S hydrolysis. Activitiy of wet-mixing kneading CoMo/Al_2O_3 catalyst was compared with catalyst of same composition prepared by impregnation.───以SO2的加氫反應和CS2的水解反應為指標反應,考察了CoM o/A l2O3催化劑對C laus反應尾氣的加氫轉化活性,并與浸漬法CoM o/A l2O3催化劑進行對比;

50 、The method of complex phosphate impregnation for improving the oxidation resistance of graphite materials was described.───摘要用**酸復合鹽浸演法對石墨材料進行浸漬，研究其抗氧化性。

51 、Born to a virgin who had been impregnated by a devil.─── 生來就是一個 被惡魔玷污的人

52 、artificial impregnation instrument───人工受孕機械

53 、Impregnation Technology on Aluminium Alloy Castings of Automobile───汽車鋁鑄件浸滲技術

54 、These adhesives can be used for tightening screw and impregnation of micropore.───主要用于各種螺紋件的鎖固密封和金屬零部件微孔的浸滲密封。

55 、Novel Ti-doped silica gel adsorptive materials were prepared by treating ceramic fiber paper with the sequential impregnation of water glass and the aqueous solution of acidic titanium salt.───以陶瓷纖維紙為基材,依次經水玻璃、酸性鈦鹽溶液浸漬制得新型鈦摻雜硅膠吸附材料。

56 、Showa Highpolymer impregnation use phenolic resin can be used in speaker dump, oil filter paper in automobile etc.───日本昭和高分子含浸用途的酚醛樹脂包含喇叭**支片（彈波），汽車油濾器濾紙等用途。

57 、Main design index of bonding mixing equipment for impregnation in polyester spunbonded production line is introduced in the paper. The moving course of fluid is analyzed.───主要介紹了聚酯紡粘線中浸膠處理的膠乳混合設備主要參數的設計,并分析了攪拌過程中流體的運動過程。

58 、The combined hysteroscopy and laparscopy could improve the repatency rate of salpinxes (81.94%) and the impregnation rate (54.63%).───宮腔鏡、腹腔鏡聯合應用能提高輸卵管復通率(81.94%)及受孕率(54.63%)。

59 、To improve the impregnation degree, properly prolonging processing time, moderately raising temperature,increasing porosity of mat and filanent diameter, reducing fiber ...───但升高溫度和提高浸漬壓力對浸漬過程的影響相對較小。

60 、To meet the requirement of melt impregnation, DPS is added to improve the flow of PEEK resins.───為了滿足熔融浸債工藝的要求，加入二苯砜來改善PEEK的流動性。

61 、Impregnation and Dying of Ancient Jade and Identification───古玉的沁色、染色及鑒別

62 、The results showed us that the key factors in preparation of SAC from IER were air oxidation, KOH impregnation, carbonization and the temperature rate of heating.───對氧化過程中樹脂的變化進行了紅外分析，提出了“樹脂經空氣氧化結合了大量氧原子，從而能夠抑止碳元素的脫除”是碳收率提高的原因所在。

63 、The model is further applied to the structure of mixed premix.It shows that the impregnation time of wrapped structural premix is just trifle greater than that of mixed structural premix.───利用該模型對混合結構預混料的進一步研究發現,包纏結構預混料中絲束的完全浸潰時間僅略長于混合結構預混料。

64 、Results show that cold plasma treatment improves the surface polarity and impregnation of carbon fiber, which increases the bonding property of carbon fiber braid/epoxy composites, and there...───實驗結果表明,冷等離子體處理提高了碳纖維表面活性、浸潤性,從而改善了碳纖維縫編織物/環氧復合材料的界面粘結性能,進而改善了復合材料的界面性能。

65 、Capillary impregnation of pure resins in the transverse direction of unidirectional cloth beds was studied elementarily by using self-designed fiber holder.───使用自行設計的夾具對純樹脂沿纖維織物厚度方向的毛細浸滲行為進行了初步研究。

66 、Designed to be impregnable in the event of a siege.─── 被設計成在包圍下堅不可摧

67 、The heteropoly acid (PW_(12)) supported on montmorillonite modified by surfactant catalyst was prepared by means of impregnation and refluxing-adsorption methods.───以表面活性劑修飾的蒙脫石為載體,選取不同溶劑,采用浸漬法、回流吸附等方法,將**鎢雜多酸負載于表面活性劑修飾的蒙脫石上。

68 、MoO_3 can dissolve in SnO_2 forming solid solution in the catalyst prepared by precipitation method, while Mo ions diffuse into the bulk of SnO_2 in the catalyst prepared by impregnation.───沉淀法所得樣品中MoO_3可溶于SnO_2形成固溶體; 浸漬法則可發生鉬離子向SnO_2體相的**;

69 、In addition, the coverage and number of carbon layers in CCA can be easily controlled by changing the sucrose content in the precursors and the impregnation times.───在這種復合材料中，碳層厚度可控制為一個石墨單層的厚度，且碳的覆蓋度及層數可以通過改變浸漬的蔗糖量及浸漬次數來進行調控。

70 、The bitumen occurs as reticulates, impregnation, intercrystalline pores, dissolved caverns and fissures.───瀝青產狀多以網狀、浸染狀、晶間孔型、溶洞型、裂縫型賦存；

71 、Five series of supported WO3 catalysts, prepared by impregnation method, have been studied by LRS, UV-DRS,XRD, and TPR methods.───應用LRS、XRD、UV-DRS和TPR技術對負載氧化鎢催化劑進行了表征.

72 、You realize that I can't impregnate you anymore.─── 你知道我不會再讓你**了

73 、Below the premise that makes sure impregnation is measured, increase the concentration of macerate albumen as far as possible, can decrease..───在保證浸膠量的前提下，盡量提高浸漬胚乳的濃度，可以減...

74 、thermometer for impregnation appliances───人工授精用溫度計(獸醫用)

75 、In order to obtain the preferable impregnation performance and reduce the cost of C/C composite,much attention should be given to the factors of fluidity,viscidity,soft point etc.───為獲得較好的浸漬性能,在提高瀝青殘?zhí)柯实耐瑫r(shí),應兼顧其流動性、粘度和軟化點等因素,以減少浸漬次數,降低C/C復合材料的成本。

76 、Levaditi's silver impregnation───列瓦迪提(氏)鍍銀法

77 、The concentration profiles of catalyst precusor in spherical support were investigated for dry impregnation process under equilibrium adsorption.───本文探討了干法浸漬過程中達到吸附平衡時,催化劑前體在球形載體內的濃度分布。

78 、An astronaut who was impregnated in space.─── 一個在太空里**的宇航員

79 、They remind us that the bank is impregnable.─── 他們提醒我這座銀行固若金湯

80 、PN 9213 is a universal penetrator. It is used in impregnation systems to help to penetration and distributing of filling resins. It can also improve adhesion.───PN 9213為通用型水性滲透劑。使用于填充系統加速滲透性，噴涂時改進均勻性，水性涂層中改進接著性。

81 、Casting repairs can be carried out after IVECO authorization No. repairs are admissible by means of impregnation unless otherwise specified on drawing or by explicit derogation.───在取得IVECO授權編號后，進行修理鑄件。除非圖紙?zhí)貏e說明或外在損壞，用注入的方法修理是允許的。

82 、PROSPECTING DISPERSED IMPREGNATION IN DAM BY GPR───地質雷達勘察壩體“散浸”

83 、The current situation and characteristic of vacuum impregnation process and equipment in refractory industry in China are analyzed and introduced.───對我國耐火材料行業的真空浸漬工藝及設備現狀進行了分析,介紹了國產化真空油浸裝備及工藝特點。

84 、The catalyst, from a metal wall and catalytic layer prepared by anodic oxidation, hydration and impregnation of the catalytic composition, was investigated for the treatment of automobile tail gas.───開發了用于汽車尾氣凈化的金屬壁與催化層一體化催化劑。

85 、syringe for artificial impregnation───人工授精注射器, 精液注射器

86 、microscopic impregnation behavior───微觀浸潤行為

87 、Impregnation with ammonia or an ammonium compound.───氨化作用用氨或氨化物浸滲

非金屬基體復合材料的制備方法大致有哪些

1. 浸漬法（Impregnation method）：將增強材料浸漬于樹脂基體中，在高溫下固化。

2. 熔體混合法（Melt blending method）：將增強材料與基體熔融混合，在冷卻凝固后得到復合材料。

3. 擠出法（Extrusion method）：將增強材料混合于樹脂基體中，經過擠壓成型得到復合材料。

4. 粉末冶金法（Powder metallurgy method）：將增強材料粉末與基體粉末混合后在高溫下進行熱壓成型。

5. 真空吸附法（Vacuum infiltration method）：將增強材料置于基體上，通過真空吸附將樹脂浸漬到增強材料中，在高溫下固化。

6. 微波輔助制備法（Microwave assisted method）：利用微波場作用下的局部加熱來促進基體和增強材料的結合。

7. 3D打印法（3D printing method）：將增強材料和樹脂分別制成粉末或顆粒，在3D打印機上進行疊層打印制備。

生產vpi是什么意思

生產VPI是指生產故障檢測器件，VPI是英文Vacuum Pressure Impregnation的縮寫，意為真空壓力浸漬。生產VPI時需要將電氣設備中的繞組浸泡在浸漬樹脂中，通過真空和壓力，使樹脂完全填充空氣空隙。這樣可以提高電氣設備的絕緣性能和散熱效果，從而延長設備壽命。

生產VPI需要什么設備和工藝

生產VPI電器設備需要用到真空負壓罐和浸漬樹脂。首先將電器設備的繞組放入罐內，啟動罐體的真空泵，使罐內形成較高的負壓；接著將浸漬樹脂加入罐內，使其填滿罐內，并且浸潤繞組；最后使罐體增加壓力，壓實浸漬樹脂。整個過程需要十分小心謹慎，以確保質量和安全。

生產VPI在電氣設備中的應用

生產VPI的樹脂具有良好的控制溫度和劣化的特性，因此在電氣設備中廣泛應用。例如，VPI可以被用于勵磁變壓器、變壓器等。這些設備往往需要在高溫和高壓下工作，使用VPI可以使其不受振動影響，并且提高絕緣和機械強度。此外，VPI也可以用來保護電機的絕緣材料，優化電氣設備的性能。